Linsn RV908 LED Display Receiving Card with 16pin Hub75 Interface

Linsn RV908 LED Display Receiving Card with 16pin Hub75 Interface

Linsn RV908 has been updated to RV908H, RV908M. Please kindly be noted. We still have some RV908 cards in stock. You don't need to do any degrading for the new card if you buy the same part number for replacement.  We will ship RV908H ( in the year of 2014 or 2015,fully compatibe) if RV908 is out of stock.

Please contact us if you need LINSN RV918.

RV908 is designed for standardized LED display products, no need for LED Hub Card. The functionality is fully compatible with the RV801 led receiving card in the same size. It is the RV801 plus HUB75 hub cards combined. 

It has the following features compared with RV801:

1.It has 12 pcs HUB75 of 16P interface,Hub card is no need anymore.

2.Support 12-bit color HDMI inputs (need to send cards with nine generations)

3.Using 18 signal processors, maximum support RGB each 18 (260,000) gray

4.Single card maximum support 1024X256 pixels, 1,024 single-point color correction

5.Supports single-card color space conversion

6.Support configuration file readback

7.Support program to copy

8.Hot backup support dual receiver card for demanding performances Screen

9.Support pixel fault detection (to be supported by a dedicated chip)

10.Support the network cable BERT

11.Support for cable fault detection

12.Support cabinet door switch monitoring

13.Two fan speed monitoring

14.Three-way voltage monitor, all the way for the system, two external power supply box

15.Temperature monitoring

16.Humidity Monitor (need humidity sensor)

17.Smoke Monitor (need smoke module)

18.CE-EMC standards in line with EU